Shakshat Virtual Lab 
INDIAN INSTITUTE OF TECHNOLOGY GUWAHATI
Steps for Connection:
1. Choose the red colour cable button .
2. Connect L+ to the positive terminal of the ammeter.
3. Connect u1 to the negative terminal of the ammeter .
4. Choose the black colour cable button .
5. Connect L- to u2 .
6. Choose the red colour cable button .
7. Connect L+ to the positive terminal of the voltmeter .
8. Choose the black colour cable button .
9. Connect L- to the negative terminal of the voltmeter .
10. Click the check button and if the connection is correct, click OK .
11. If the connection is wrong, follow the error message displayed and correct the connection .
12. Select 1 on the two way switch on the left hand side of the panel .
13. Switch ON the MCB and click the start button .
14. Switch ON the second MCB .
15. Click ‘b’ on the three way switch to select the variable voltage .
16. Select 1 on the DC two way switch .
17. Select voltage with the voltage regulator knob and then note the readings of voltmeter, ammeter .